Close Window  X 
swatch
Color samples are not available for painted colors. Metallic paint colors have tiny silver fleck in the paint which we have tried to represent on the metallic color samples. They are by nature a semi-gloss. Solid colors are full gloss unless requested. If you need exact colors we can color match Sherwin Williams, PPG and Pantone numbers for $20 per color. Colors on computer monitors will vary widely due to the type of monitor and the graphics card. We do not guarantee colors shown on this website will match actual product.
Close Window  X 
Showing all fonts sorted alphabetically
 
Close Window  X 
Help shows here when images are moused over
Close Window  X 
Help shows here when images are moused over
SignLetterSource.com
Manufacturer & Distributor since 1999
Products ship from various locations
including-Boston-Virginia-Chicago-Minnesota-Iowa-Texas-Montana and Nevada
cart Shopping Cart:   $0.00
Contact Us
Gemini Injection molded 'Minnesota' sign letters
  • Ordering Page
  • Video
  • Price Chart
  • Mounts
  • Gallery
  • About
helpStep 1 helpStep 2 helpStep 3 helpStep 4
Enter Letters - Numbers - Punctuation Choose a Style/Font Letter
Profile
Uppercase Height Choose Color / Finish
Line 1
profile
arrow
Line 2
profile
arrow
Line 3
profile
arrow
Line 4
profile
arrow
Show tooltip help     help Matte Finish (+30% except metallics)
Click here to
Watch Product Video
INFO Lowercase Height Letter Depth Uppercase Price Lowercase Price Line Total Pattern Price Total Price GRAND TOTAL
Line 1             $0.00 $0.00
help Alignment help Backgrounds (design use only) Update Display Automatically

Your selected font displays here
Comments about layout or other details can be entered during checkout
Step 5: Select Mounting Hardware
  helpMounting Hardware helpStud Length helpStuds for Brick help Mounting Pattern
Line 1
arrow
arrow
Line 2
arrow
arrow
Line 3
arrow
arrow
Line 4
arrow
arrow
Total Characters  
Cart Subtotal
Total Cost for Characters  
Mounting Pattern  
Total this page  
Qty
*Quantity is applied to ALL lines

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Holding space for price table

Installation Hardware

Plain No Mounts As you can see from the image at left, ABS/Plex Vacuum Formed Sign Letters are hollow in the back and require some type of additional hardware for mounting purposes. We allow you to purchase without mounts assuming you have some other way to affix them. Please note that ordering without a mount will require you to return them to the factory at your expense, if you later decide you want mounts. The same goes for mounting patterns.
Pad Mount Where drilling your wall is not desirable or not allowed by a landlord, the pad mount provides a way to surface mount the letters using silicon adhesive directly to a surface. Best for indoor applications as outdoors will make them easily stolen or subject to wind loss. Apply silicon caulk liberally to the pads and apply directly to the wall surface using masking tape to hold the letters in position while the silicon sets.
Adjustable Pad Same as the pad mount but with adjustable pads to allow for stand off. Adjustability is approximately 0" - 3/8". Other sizes can be requested.
Stud Mount

One of the easiest methods to use is the stud mount. Threaded plastic blocks are glued into the backs of the letters at the factory and a threaded metal rod (stud) is screwed into the block. Using a mounting pattern (sold separately), drill required holes in the wall or mounting surface then fill holes and coat studs with silicon then push the entire assembly into the holes.

TIP: Be sure to drill holes slightly oversize. Studs should not be tight in holes to allow for expansion/contraction. Be sure to order the mounting pattern(s) with the letters otherwise you will have to return the letters to make one later. Also See additional notes bottom of page.

Combination Mount

Same as the stud mount with the addition of stud through pads on the top part of the letters, fixed pads on the bottom of the letters. The stud through pads are adjustable and the rods are designed to go into pre drilled holes in your wall. This mount COMBINES the pad mount with the stud mount allowing for less drilling which may be desirable.

See additional notes bottom of page and review videos for proper install methods.

Combination All Mount

Stud through pads on ALL parts of the letters allow for maximum adjustability and standoff if desired. The stud through pads are adjustable and the rods are designed to go into pre drilled holes in your wall. Drilling is required for each stud/pad in the same way as the stud mount but also provides full adjustability for depth and uneven surfaces.

See additional notes bottom of page and review videos for proper install methods.

minnesota sign letters
Fabulous shot showing the bevel face Architectural font professionally installed on graduated molding
using combination all mounts. Color is painted brilliant gold #0400

Assortment of minnesota sign letters
Assortment of Gemini Injection Molded Minnesota Letters

Injection Molded Plastic Letters

Assorted Minnesota letters from Gemini

GEMINI’S MINNESOTA™ LETTERS have the look and feel of cast metal letters so they’re suitable for almost any “up-scale” application.

Made from earth-friendly recyclable Cellulose Acetate Butyrate (CAB), Minnesota Letters are beautiful, crisp letters with razor-sharp edges that are easy to install and guaranteed for life.

Available in six standard styles and 45 standard colors, they are in stock and ready to be shipped in just 1 business day. More durable than most other plastic letters, they are able to stand up against the scrutiny of indoor applications and tough enough to withstand the elements outside.

In comparison, Vacuum Formed Plastic Letters have returns that are closer to 85 degrees with edges that are more rounded. Other than these differences, there is no structural difference in the two products.

Advantages of Minnesota Letters

Quick Manufacturing

  • 1 Day on White or Black
  • 2 Days on Any Painted Color

Ease of Installation

  • Lightweight despite added dimension
  • Can be installed without drilling into sign face
  • Many installation methods available

Durability

  • Impact resistant
  • Fade resistant
  • Guaranteed for Life!

Economy

  • Same basic cost as formed letters
  • Added depth & dimension over cut letters
  • Recyclable plastic

CONTACT  | ABOUT US  |  ORDER STATUS   |   SHOPPING CART   |  INSTALLATION INSTRUCTIONS  |  HOME
COPYRIGHT © 2010 MONTANA LETTERING INC.      PRIVACY NOTICE

 

instructional video