Products usually ship in 5-7 working days
Products ship from Iowa
Metal on foam letters are made from HDU foam core that has a plastic face and back. The metal face is the same material used in our metal face acrylic letters which extends the product line by adding greater depth of the foam core.
INDOOR OR OUTDOOR USE.
Graphical logo prices are different from letter prices. Select the overall dimensions of your logo to get a base price. Keep in mind that the base price includes up to 30 parts that make up the entire logo. Price includes your choice of mounting hardware and the installation pattern. Logos over 24" may be available depending on artwork. Contact us for quote.
The no-mount option is for when you want to glue letters directly to a flat surface using some kind of adhesive such as silicon caulk or liquid nails. The problem with this type of installation is that glue tends to squeeze out the edges and it can get very messy. Also, until your glue sets the letters can move around and for large letters that means you need to use long strips of masking tape to hold them in place.
DOUBLEFACE TAPE MOUNT
Double sided tape can only be applied to letters up to 24" in height. If using this option then always use a liquid silicon caulk as well to protect the letters in case the tape should fail
Plastic pad extending beyond back of letter, typical with plastic letters, install product direct to wall without having to drill any holes. Installed with use of a spacing guide. Silicone is a common adhesive to hold such letters.
STUD IN BLOCK MOUNT
This is the default stud mount. This option will have blocks glued to the backs of the letters that create a natural surface standoff of about 3/8" which can be enhanced by choosing a standoff length in the forms options. The blocks are drilled and tapped to accept studs(threaded rods) that get glued into holes drilled in the mounting surface. A drill mounting pattern is required.
The combo or combination mount differs from the combination all mount in that it only has stud THROUGH pads on the tops of the letters and standard PAD mounts on the bottoms. This mount is useful where you want to drill as few holes as possible and still have mounting rods(studs) in the wall. Installed by drilling holes for the stud through pad and adhering non stud pads directly to mounting surface.
COMBO ALL MOUNT
The combination all mount is stud through pad on all points. This gives you adjustability on every stud and is useful for irregular surfaces such as corrugated metal buildings, lap siding, stone walls or anywhere you want a standoff form the wall that is adjustable during installation.
FLUSH STUD MOUNT
Letters have to be at least 3/8" thick to drill and tap the holes but this mount is very secure since it does not rely on a glued block to hold the stud. This mount is best used without wall stand-off which will compromise the purpose of this mount which is to prevent theft. If you want stand-off you can select it also but allow for the stud length which should be 2" in the wall plus the length of the stand-off. Mounting pattern is required. See the section above for mounting to real brick or for more information.
100% USA MADE - When ordering our products you are supporting American workers, their families and American Manufacturing.
All our products carry a lifetime manufacturer warranty. That means that should a product fade, break or contain any defect, the manufacturer will refinish or replace the defective materials at no cost to you, as long as the product is installed in its original location. For warranty claims please email us or use our contact form. We will pass your claim onto the plant for their consideration
All products are designed to last a lifetime. All our materials and finishes are tested in many environmental conditions. We refine our coating technology, and deliver a product that we know will last much longer than the life of any other product you may install. From experience in the field and from our test lab results, we know that our products will last in excess of 10 years without any noticeable degradation in appearance. We know, from many installations around the world, that many of our products last longer than that.
Please note that warranties are limited and do not cover embedding letters in concrete or using interior products in outdoor projects.